Getting Acquainted; Key And Control Knob Operations - Kenwood TH-D75A User Manual

GETTING ACQUAINTED

KEY AND CONTROL KNOB OPERATIONS

[ ]
Press [ ] (1s) to turn the transceiver power ON and OFF.
Press [ ] to turn the backlight ON and OFF when the
transceiver power is ON.
The backlight turns OFF when the backlight timer elapses.
When the voice guidance function is not set to OFF, the
voice announces the operating states of the transceiver.
When pressing [ ] while announcing, the voice stops.
[MONI]
Press and hold [MONI] to unmute the speaker in order to
monitor signals.
Release [MONI] to return to normal operation.
Press [F], [MONI] to enter the Squelch level adjustment
mode.
[PTT]
Press and hold [PTT], then speak into the microphone to
transmit.
[ENC] Control
Rotate the [ENC] control to select an operating frequency,
Memory channel, Menu item, setting value and change the
scan direction, etc.
[VOL] Control
Rotate the [VOL] control to adjust the speaker volume.
Multi-Scroll Key
[ ], [ ]
Press [ ] or [ ] to select an operating frequency,
Memory channel, Menu item, setting value or to change the
scan direction, etc.
Press and hold [ ] or [ ] to change an operating
frequency, Memory channel, Menu item, setting value, etc.
continuously.
[ ]
Press and hold [ ] to select a frequency band in VFO
mode.
Press [ ] to move to the next step in various setting
modes.
8
LCD Display
Speaker
SP/MIC Jacks
Microphone
microSD memory card slot
USB connector (USB Type-C
DC IN (External power supply) Jack
[ ]
Press and hold [ ] to select a frequency band in VFO
mode.
Press [ ] to move back to the previous step in various
setting modes.
[ENT]
Press [ENT] to enter frequency direct entry mode in VFO
mode.
Press [ENT] to complete the setting value and move to the
next step in Menu mode or various setting modes.
[MODE]
Press [MODE] to select the mode.
Press [F], [MODE] in DV mode or DR mode to enter Digital
Function Menu mode.
This key operates the function displayed in the lower left
side. (Refer to page 15.)
[MENU]
Press [MENU] to enter Menu mode.
Press [F], [MENU] to cycle the transmit output power.
[A/B]
Press [A/B] to select operation band A or B.
Press [F], [A/B] to switch the Single band mode and Dual
band mode.
This key operates the function displayed in the lower right
side. (Refer to page 15.)
[F]
Press [F] to enter Function select mode.
Press [F] (1s) to turn the transceiver Key lock function ON
and OFF.
12 Keypad
[VFO] (1)
Press [VFO] to enter VFO mode. In Memory channel
or CALL channel, press [F], [VFO] to copy the current
Memory channel or Call channel to the VFO (memory shift).
)
TM