Table of Contents
Advertisement
Magnifying and Searching for details on the
projected picture
If you need to find the details on the projected picture, magnify the picture. The picture can
be enlarged up to 300% than the original picture size with 50% increments. Use the
direction arrow keys for navigating the picture.
•
Using the remote control
1.
Press D. ZOOM + to display the Zoom bar. The
center of the picture will be magnified when the
key is pressed again. Press the key repeatedly
until the picture size is suitable for your need.
2.
Use the directional arrow keys ( ,
on the projector or remote control to navigate
the picture.
The picture can only be navigated after the
picture is magnified. You can further magnified
the picture while searching for details.
3.
To reduce size of the picture, press D. ZOOM -.
When the key is pressed again, the picture is
further reduced until it is restored to the
original size.
•
Using the OSD menu
1.
Press MENU and then press
Display menu is highlighted.
2.
Press
3.
Press
4.
Press
display the Pan page.
The Pan sub-menu is only available when
the picture is magnified.
5.
Use the directional arrow keys ( ,
on the projector or remote control to navigate
the picture.
6.
To reduce size of the picture, press EXIT or press
MENU to go back to the Display menu,
highlight Digital Zoom, and press
until it is restored to the original size.
to highlight Digital Zoom.
to magnify the picture to a desired size.
to highlight Pan and press ENTER to
,
,
)
/
until the
3
4
,
,
)
repeatedly
Display
Aspect Ratio
Digital Screen Shift
0
Keystone
Attachable Lens
Position
Overscan Adjustment
0
Digital Zoom
250%
Pan
PIP
Split Screen
PC & Component YPbPr Tuning
Analog RGB
Pan
EXIT
Back
Operation
Fill
Off
ENTER
EXIT Back
41
Advertisement
Table of Contents
