Table of Contents
Advertisement
Displaying more than one picture source
simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources,
which can be used to enhance your presentation in an interesting way.
Ensure the signals you want to display are correctly connected to the projector.
Splitting the screen
The projector is able to display two input sources by dividing the projection equally into two
screens on the left and right sides. That is each source uses 640 x 768 pixels at most of the
projection. To display the split screen:
•
Using the projector or remote control
Press
on the projector or SPLIT SCREEN/
ON on the remote control to split the projection
screen and press further until a desired way of
display is selected.
To restore the projection to one big screen, press
or SPLIT SCREEN/OFF.
•
Using the OSD menu
1.
Press MENU and then press
the Display menu is highlighted.
2.
Press
press ENTER. The Split Screen page
displays.
3.
Highlight Split Screen and press
select On.
The projector will select two currently active
signals to display and the last viewed picture will
be displayed on the right side as a main source.
See
"Split Screen and PIP source conflict list" on
page 53
for the conflict source combinations.
4.
To change the Left Source or Right
Source, press
or Right Source, and press ENTER. The
source selection page displays.
5.
Use
/
press ENTER to save the setting and go back to the Split Screen page.
6.
To make OSD settings to one of the two sources (Left or Right), highlight Active
Window, and press
The settings made on the OSD menus will only take effect on the active window.
See
"Disabled functions for the active windows" on page 53
7.
To change the way the pictures are displayed, highlight Split Screen Relationship and
press
/
details.
to highlight Split Screen and
to highlight Left Source
to highlight the source you want to display for the left or right window, and
/
to select the source you want to make adjustments.
to select a desired way. See
/
until
Display
Aspect Ratio
Digital Screen Shift
Keystone
Attachable Lens
Position
Overscan Adjustment
/
to
Digital Zoom
Pan
PIP
Split Screen
PC & Component YPbPr Tuning
Analog RGB
Split Screen
Split Screen
Split Screen Relationship
Left
Right
Active Window
"The Split Screen display way" on page 53
Fill
0
Off
0
100%
ENTER
EXIT Back
On
Equally Split
Right
EXIT Back
for exceptions.
Operation
for
51
Advertisement
Table of Contents
