Atag VA5114MT User Manual page 50

Table of Contents

Advertisement

Available languages

Available languages

50
Cleaning the ceiling spray arm
We recommend to clean the ceiling spray
arm regularly to prevent soil from clogging
the holes. Clogged holes can cause
unsatisfactory washing results.
The ceiling spray arm is placed on the
ceiling of the appliance. The spray arm (C)
is installed in the delivery tube (A) with the
mounting element (B).
1. Release the stoppers on the sides of
the sliding rails of the cutlery drawer
and pull the drawer out.
2
C
B
A
1
2. Move the upper basket to the lowest
level to reach the spray arm more
easily.
3. To detach the spray arm (C) from the
delivery tube (A), turn the mounting
element (B) counterclockwise and pull
the spray arm downwards.
4. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes. Run the water through
the holes to wash soil particles away
from the inside.
5. To install the spray arm (C) back,
insert the mounting element (B) in the
spray arm and fix it in the delivery tube
(A) by turning it clockwise. Make sure
that the mounting element locks into
place.
6. Install the cutlery drawer on the sliding
rails and block the stoppers.

Advertisement

Chapters

Table of Contents
loading

Table of Contents