Audio/Video System - Bang & Olufsen BeoCenter 2 User Manual

10
You can use your music system as a
stand-alone system or as a Audio/
Video system, if you connect the
systems with a Master Link cable.
If you connect your music system
and your video system, you must
make sure that they are set up to
function together. This means that
you have set it to the correct Option
with Beo4 as described on this page.
Your music system is set for Option 1 from the
factory and if the setup requires Option 0, it
will change to Option 0 automatically.
When your music system is connected to your
video system with a Master Link cable, you
choose whether to use the speakers
connected to the music system, if any, or the
speakers connected to the video system. Via
the menu 'DVD SOUND' described on page 18
in the BeoCenter 2 Guide, you decide which
speakers should be used.

Audio/Video system

To program Option for your audio system
with the Beo4 remote control...
> While holding down the • button, press LIST.
> Let go of both buttons.
> Press LIST repeatedly until OPTION? is shown in
the Beo4 display and press GO.
> Press LIST repeatedly until A.OPT is shown in the
Beo4 display and then key in the appropriate
number (0, 1 or 2).
Choose V.OPT to program Option for your video
system.
The music system has five different Option
settings:
Option 0. Used when your music system is
connected to your video system and no speakers
are connected directly to your music system.
Option 1. Used when your music system is set up
on its own or connected to a video system,
when speakers are connected to your music
system.
Option 2. Used when your music system is set up
in one room and connected to a video system
set up in another room.
Option 5. Used when your music system is set up
in a link room which also comprises a Bang &
Olufsen television.
Option 6. Used when your music system is set up
in a link room without a Bang & Olufsen
television.
Option 2
An Audio/Video system. When your music system
is connected to a video system and the speakers
are connected to the video system, the video
system takes over some of the functions
mentioned in the BeoCenter 2 Guide, for example
programming a Timer.
Option 1
A stand-alone setup.
Option 0