How To Use The Pincode System - Bang & Olufsen BeoCenter 2 User Manual

You choose whether or not to
activate the pincode system. The
pincode system is deactivated when
you delete your pincode.
The use of a pincode means that if
your music system has been
disconnected from the mains for
more than approximately 30
minutes, it can only be activated
again by switching it on and keying
in your pincode via the close-up
operation panel.
If the pincode is not entered, the
music system automatically switches
to standby after 3 minutes.
You can change your pincode, but it
is only possible to change it five
times within a period of 3 hours.
If you enter the wrong pincode or
Mastercode, or if you try to change
the pincode more often that possible,
the message PINCODE ERROR
appears in the display.

How to use the pincode system

PINCODE
1 NEW PINCODE ...
2 DELETE PINCODE ...
To call up the pincode menu, press LIST and then
press ss twice followed by EXIT.
What's on the PINCODE menu...
NEW PINCODE... Use this menu to enter or
change your pincode.
DELETE PINCODE... Use this menu to deactivate
the pincode system.
CONFIRM PINCODE
Useful hints...
If you enter a wrong pincode, you get four more
attempts to key in the code, after which the music
system switches off and cannot be switched on
again for 3 hours.
Should you forget your pincode, please contact
your Bang & Olufsen retailer who will assist you in
getting a Mastercode from Bang & Olufsen. You
need the Mastercode to reactivate your music
system.
To open for Mastercode input...
> While the music system asks for your pincode,
ss
press three times to open for Mastercode
input.
> Enter the Mastercode.
> Once you have entered the Mastercode, the
pincode system is disabled and the music
system is ready for use. To activate the pincode
system again, you must enter a new pincode.
15