OHAUS Explorer EX125 Instruction Manual page 105

EXPLORER BALANCES
To delete a user, select the user you
want to delete and press Delete. Then
press Yes to confirm.
For Group selection, you can set up to 100 operators, 10 Supervisor I, 2 Supervisor II and
1 Admin who is by default in total. Please check the following table for the permission of
each role.
Admin can create, edit or delete Supervisor I, Operator and Supervisor II, while
Supervisor I can create, edit or delete Operator. Operator and Supervisor II cannot access
User management menu.
Settings and Application
User management
Password policy
User settings
Balance setup
Calibration setting
External calibration
Internal calibration
Date & Time
Application modes settings
Units
Device & Print settings
GLP
Balance name
library
System log
Diagnostic
Routine test
Factory rest
Edit Settings
(when library record is activated)
Edit Settings
Minimum Weight
5.4.2 Password Policy
To set when password will expire. There are three selections, 30 days, 60 days and 90 days.
This function can also be turned off.
5.4.3 Auto Standby (minutes)
To set the time period for the balance to enter standby mode if no screen activity for x minutes.
Default value = OFF (disabled). Range is 1 to 240 minutes.
Note: When the balance enters standby mode, the current user will be automatically logged out.
You need to log in the next time you use the balance.
Admin Supervisor I
√ √
√
x
√ √
√ √
√ √
√ √
√ √
√
x
√ √
√ √
√ √
√ √
√
x
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
EN-103
Operator Supervisor II
x x
x x
√
x
x x
x x
√
x
√
x
x x
x x
x x
x x
x x
x x
x x
√
x
x x
√
x
x x
x x
√
x
x x