Advertisement
Setting Oven Controls
Setting the clock
When the appliance is powered up for the first time or when the
electric supply to the appliance has been interrupted, the dis-
play will flash "12:00"
Fig. 28 12:00 displayed when oven is powered up or
power is restored after an interruption
To set the clock for 1:30:
1. Press set clock
130
2. Enter
3. Press START to accept
•
Be sure to set the clock to the correct time of day before
using the oven, especially when cooking with added time
instructions.
•
The clock cannot be adjusted while the oven is cooking, the
timer is active, or during a self clean.
•
If an invalid time of day is entered, the control will sound
with a triple beep (error tone). Re-enter a valid time of day
and press START. If CANCEL is pressed the clock will
automatically set for 12:00.
(Figure
28).
using numeric keypad
Changing clock display mode
The oven control is factory preset to display the time of day in
the 12-hour clock setting. The display can be changed to a 24
hour clock setting or to the OFF mode.
When the clock display is turned off it continues to run and will
function based on the previously set 12 or 24-hour setting.
To change clock display modes:
1.
Press and hold set clock for 6 seconds
2.
Press set clock to toggle between "12 hr
Day- 24hr day" or "CLO OFF" display
choices. Release key when desired mode dis-
plays (
3.
Press START to accept
130
START
Fig. 29 Clock set for 12 hour mode
Fig. 30 Clock set for 24 hour mode
Fig. 31 Clock off mode
The clock display mode cannot be changed while the oven is
active with any cooking function or during self-clean.
17
START
Advertisement
