Advertisement
Setting Surface Controls
Cooktop power level settings
The surface control provides varied settings for each induction
cooking zone. These power levels include Lo, 5.0 (medium), Hi,
and Power Boost (Pb).
-
+
The
and
keys provide incremental adjustments for precise
control when changing surface settings.
Figure 9:
Power settings from Lo to Pb
Cooktop element display windows
The control panel has four digital display windows to show
power levels for the cooking zones. Power levels are monitored
using the window displays and controlled with the corre-
sponding keys.
Available power settings
The control panel displays power level settings ranging from Pb
(Power boost)
(Figure
11) and 3.0
ments of 0.5 (1/2). Settings between 2.8
simmer settings and decrease or increase in increments of 0.2.
IMPORTANT! The power boost (Pb) setting can only be
accessed by pressing ON-OFF and then
remain active for ten minutes before automatically powering
down to Hi unless the power is reduced using the
Hot surface element message (HE)
After turning any of these elements OFF, the cooktop will
remain HOT for some time. The corresponding HE message
(Figure
14) will remain ON until that element position on the
cooktop has cooled. The display will turn off when cool.
(Figure
9) to Lo. The settings between 9.5
(Figure
12) decrease or increase in incre-
(Figure
+
Figure 10: Power boost level
Figure 11: Hi power and 9.5 setting
Figure 12: 3.0 setting and 2.8
Figure 13: 1.2 setting and Lo (lowest setting)
Figure 14: Display showing OFF and Hot Element
Figure 15: Cooktop lock and Sabbath mode messages
Cooktop lockout message (
The (
lockout feature is active
mode. Refer to the cooktop lockout instructions for more
detailed information.
Sabbath Day feature (Sb) message
12) and Lo are
The display windows will show the
Sabbath Day feature is active
Sabbath mode"
. The Pb setting will
IMPORTANT!
Do not allow aluminum foil, plastic, or ANY material that can
-
key.
melt to make contact with the ceramic glass cooktop. If these
items melt on the cooktop they can damage the ceramic
cooktop.
- -
- -
) message will appear in the display when the cooktop
(Figure
15) and during the self clean
(Figure
section for detailed instructions.
)
- -
message when the
15). See
"Setting the
11
Advertisement
