Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
The type plate is located at the bottom of the clock
Connect the AC power adaptor to :
the power supply socket on the main unit.
the wall power outlet.
You can only set time in standby mode.
Press SET TIME to enter the clock setting
Press HOUR+ to adjust the hour.
Press MINUTE+toadjust the minute.
Press SET TIME to confirm.
4 Listen to FM
Keep the clock radio away from other electronic
devices to avoid radio interference.
For better reception, fully extend and adjust the
position of the FM antenna.
Tune to FM radio stations
Press RADIO ON/OFF to activate the
» The last selected radio frequency
displayed on the panel.
Press and hold TUNING +/- for over 2
» The clock radio tunes to a station of
sufficient reception automatically.
Repeat step 2 to tune to more radio
To tune to a station manual :
Press TUNING +/- repeatedly until you
find optimal reception.
Store and select preset radio
You can store up to 5 radio stations.
Tune to a radio station.
Press the number button until you hear a
» The preset number of station show on
Repeat step 1-2 to tune more stations.
You can overwrite a preset station by
storing another frequency in its place.
Press the number button to select
corresponding preset radio station.