Contents 1 Important 2 Notice 3 Your clock radio Introduction What's in the box Overview of the clock radio 4 Get started Install battery Connect power Set time 5 Listen to FM radio Tune to FM radio stations Store FM radio stations manually Select a preset radio station Adjust volume 6 Other features...
1 Important • Install all batteries correctly, + and - as marked on the unit. • Remove batteries when the unit is not used for a long time. • The battery shall not be exposed to excessive heat such as sunshine, fire or Warning the like.
2 Notice The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth Any changes or modifications made to this SIG, Inc. and any use of such marks by Philips is device that are not expressly approved by under license. WOOX Innovations may void the user’s authority to operate the equipment.
3 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this clock radio, you can • listen to FM radio; • set two alarms to ring at different time.
Overview of the clock radio a PRESET/SET TIME • Store radio stations in memory. • Select a preset radio station. • Set time. b RADIO ON/OFF • Press to turn on or off the radio. c HR/MIN/ TUNING • Tune to FM radio stations. • Set hour and minute.
4 Get started Note • The type plate is located at the bottom of the clock radio. Always follow the instructions in this chapter in sequence. Install battery The batteries can only back up clock and alarm settings. Caution • Risk of explosion! Keep the batteries away from heat, sunshine or fire.
5 Listen to FM Note radio • The tunning grid of the clock radio is 50KHz, the radio frequency on the display panel will increase 0.1MHz by pressing TUNING twice. Note • Keep the clock radio away from other electronic Store FM radio stations devices to avoid radio interference. • manually For better reception, fully extend and adjust the position of the FM antenna.
6 Other features Select alarm source You can select FM radio or buzzer as the alarm source. » The corresponding alarm icon lights up. Set alarm timer Note • The gentle wake-up function is designed for radio source only. Set alarm Note AL1 FM •...
Page 11
Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEPrepeatedly to select a period • (in minutes). » The clock radio switches to standby mode automatically after the preset period. To deactivate the sleep timer: • Press SLEEP repeatedly until [OFF] (off) appears.
7 Product General information information AC Power (power Brand name: Philips; adapter) Model: AS030-060- EE050, or EML0600500; Input: 100-240 V~, 50/60 Hz; 0.15 A; Note Output: 6 V 0.5A • Product information is subject to change without prior Operation Power <5 W...
If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.