Alarm; Set The Alarm Time And Mode; Deactivate The Alarm; Set Sleep Timer - Philips AJ3800/12 User Manual

5 Alarm

Set the alarm time and mode

In standby mode, you can set two alarms to ring
at different time.
Note
•
Make sure that you have set the clock correctly.
1
Press and hold SET ALARM 1 or SET
ALARM 2 to activate alarm setting mode.
2
Press HOUR+ to adjust the hour.
3
Press MINUTE+ to adjust the minute.
4
Press SET ALARM 1 orSET ALARM 2 to
confirm.
Tip
•
To check the alarm time , press AL1 or AL2 button.

Deactivate the alarm

There are 3 ways to switch off the alarm.
24 hour alarm reset :
If you want to stop alarm immediately but
retain the same setting for the following days:
PressALARM RESET/SLEEP.
•
» The clock radio beeps once.
Repeat alarm :
• When alarm sounds, pressREPEAT
ALARM/BRIGHTNESS CONTROL.
» The alarm snnozes and repeats ringing
nine minutes later. (maximum 6 times)
Cancle the alarm completely:
Press AL1 or AL2 once or more until OFF
•
appears.
EN
7

Set sleep timer

The clock radio switched off automatically after
a preset period.
Press ALARM RESET/SLEEP repeatedly to
select sleep timer period.
» SLEEP and SL:120 / SL:90 /SL: 60 /
SL:30 / SL: 15 will show on the display
panel respectively.
To deactivate the sleep timer :
Press ALARM RESET / SLEEP repeatedly until
OFF appears.