Table of Contents
Advertisement
STEP 4 Connect the water hoses
The provided hose adaptor may differ with the model. This step guides you through
connecting the connector-type adaptor. If you are provided with the screw-type adaptor,
go to 7.
C
FlexWash(COMBO)_03768N_India_EN.indd 25
Connect the water hose to the water tap.
1. Remove the adaptor (A) from the water
hose (B).
A
B
2. Use a Phillips screwdriver to loosen
four screws on the adaptor.
3. Hold the adaptor and turn part (C) in
the arrow direction to loosen it by
5 mm (*).
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
C
English 25
5/12/2017 5:53:25 PM
Advertisement
Table of Contents
