Table of Contents
Advertisement
Installation
D
B
C
To position without the pipe connector
If you do not use the pipe connector, each drain hose can be positioned in the following
ways:
B
30
English
FlexWash(COMBO)_03768N_India_EN.indd 30
A
F
E
A
A
A
E
D
C
Dimensions of the pipe connector
A
172 mm
B
112.5 mm
C
85 mm
• Check the inner diameter of the drain
outlet at the installation site.
• To make the washer drain properly,
make sure the outer diameter of the
drain hose (E) is smaller than the inner
diameter of the drain outlet.
Over the edge of a wash basin
The drain hose must be placed at a height
of between 60 cm and 90 cm from the
floor. To keep the spout of the drain hose
bent, use the supplied plastic hose guide
(A). Secure the guide to the wall using a
hook to ensure stable drainage.
ln a standpipe or laundry tub
The laundry tub (B) or standpipe (C) must
be no shorter than 46 cm and no higher or
longer than 245 cm. Make sure the drain
hose and the standpipe are not airtight.
The height of the standpipe (E) must be
1100 mm or higher from the floor.
NOTE
A: Hose guide / D: Tie straps
D
67 mm
E
Ø 35
F
60 mm
5/12/2017 5:53:29 PM
Advertisement
Table of Contents
