Samsung FlexWash WR24M9960K Series User Manual page 27

WARNING
If there is a water leak, stop operating the washing machine and disconnect from the
electrical supply. Then, contact a local Samsung service centre. Otherwise, this may cause
electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
NOTE
• After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
For models with an additional hot water inlet:
Aqua stop hose (applicable models only)
A
NOTE
The end of the aqua stop hose must be fitted to the water tap and not the machine.
FlexWash(COMBO)_03768N_India_EN.indd 27
1. Connect the red end of the hot water
hose to the hot water inlet on the back
of the machine.
2. Connect the other end of the hot water
hose to the hot water tap.
The aqua stop hose alerts users of a risk
of water leaks. It senses the water flow
and turns red on the centre indicator (A) in
case of a leak.
English 27
5/12/2017 5:53:27 PM