Smeg SAI3963B Manual page 22

• After the heating time has elapsed, the
cooking zone reverts to the previously
selected power level.
This function can be deactivated by
pressing and holding the set power level for
at least 3 seconds, or by selecting a lower
power level.
Timer
This function is used to set a timer
that will emit a sound at the end of
the pre-set time.
After having switched on the hob, without
having selected a cooking zone:
1. Touch the inside of the timer setting area.
2. Use the + and - buttons to select the
required time.
• The first digit on the left is used to select
the hours, the middle one to set the tens
of minutes and the one on the right the
minutes.
After switching on the appliance,
touch the timer setting area within 3
seconds, otherwise it will deactivate
and the appliance will have to be
restarted.
3. After 10 seconds, the timer will start the
countdown.
24
Use
4. When the time elapses, a series of beeps
will sound. Press any button to deactivate
them.
A maximum of 9 hours and 59
minutes can be set.
Using the minute minder does not
stop the operation of the cooking
zones but rather informs the user
when the set minutes have run out.
Modifying or deactivating the timer
To modify or deactivate the timer during the
countdown:
1. Press the On/Off button
the hob (if it is in stand-by).
• The timer setting area will indicate the
minutes that were set.
2. Use the + and - buttons to modify or reset
the timer.
3. After 10 seconds, the timer will start the
new countdown or will be deactivated.
Timed cooking
This function is used to program the
automatic switch-off of each
cooking zone at the end of a
period of time.
The timed cooking function can be
activated when at least one cooking zone
is switched on:
1. Select a power level.
2. Touch the inside of the timer setting area.
to activate