Table of Contents
Advertisement
Each Local GeneratorÕs pages differ from page 5. Each Local Generator typeÕs
parameters are explaned in the chart below:
Generator Type
Envelope
Peak Follower
Ramp
Q20 Reference Manual
Page
Display
5
Env Trigger Source:
Left/Right/L&R
6
Env Attack Threshold:
-32Ð0dB
7
Env Release Threshold:
-48Ð0dB
8
Env Attack: 0.00-10.00,
Env Release: 0.00-10.00
Seconds
9
Env Hold Time: 0.00-
10.00 Seconds
5
Peak Follower Source:
Left/Right/L&R
6
Peak Follower Gain: x1-
x99
7
Peak Folw. Decay: 0.20-
10.00 Seconds
5
Ramp Trigger Source:
Left/Right/L&R
6
Ramp Atk. Threshold:
-40Ð0dB
7
Ramp Rise Time: 0.00Ð
10.0 Seconds
Advanced Applications - Chapter 6
Description
Input which the
Envelope looks at for
Modulation cues
Level which triggers the
Envelope to begin
Modulating
Level below which the
Envelope will stop
Modulating and start to
decay
Time which the
Envelope takes to ramp
up to its peak value
after the Attack
Threshold has been
passed, and the time it
takes to ramp down to
zero after the release
threshold has been
passed.
The amount of time that
the Envelope will hold
at peak value before the
release segment after
the release threshold
has been passed.
Input which the Peak
Follower looks at for
Modulation cues
Amount of gain for the
input before the Peak
Follower looks at its
signal (for low level
signals)
After the Generator is
triggered, this is the
rate of the decay
Input which the Ramp
looks at for Modulation
cues
This is the level which
triggers the Ramp to
begin Modulating
This is the rate which
the Ramp will rise to its
peak value
99
Advertisement
Table of Contents
