Table of Contents
Advertisement
Chapter 6 - Advanced Applications
Editing the Local Generators
To select the Input GeneratorsÕ types and edit their parameters:
Press [MODULATION].
The [MODULATION] buttonÕs LED will light.
Press [PAGE >] seven times (or until Modulation Page 4 is underlined).
The display should look like this:
The cursor appears beneath the Generator, indicating that you may now turn
the [VALUE/ENTER] knob and select either Input Generator 1 or 2, depending
on which you want to define. In the display example above, Input Generator 1 is
defined to be an Input Envelope.
Press the [PAGE >] button to advance the cursor to the next field.
Turn the [VALUE/ENTER] knob to select either Input Envelope or Peak
Follower to be the selected Input GeneratorÕs type.
Press the [PAGE >] button to advance to Modulation Page 5.
98
GEN 1 TYPE: ENVELOPE
Q20 Reference Manual
Advertisement
Table of Contents
