Starting Scsiselect; Exiting Scsiselect - Adaptec AVA-2906 User Reference Manual

SCSI Card 2906 User's Reference
Starting SCSI Select
Follow these steps to start SCSISelect:
1
Turn or restart your computer. Allow it to boot to a
ON
prompt.
2
At the DOS prompt, insert the SCSISelect diskette and change
to the a:\ prompt.
3
At the a:\ prompt, type 2906cfg.exe.
4
From the menu that appears, use the
cursor to the option you want to select, then press Enter.
Note:
If you have difficulty viewing the display, press F5 to
toggle between color and monochrome modes. (This feature
may not work on all monitors.)
Exiting SCSI Select
Follow these steps to exit SCSISelect:
1
Press Esc until a message prompts you to exit (if you changed
settings, you are prompted to save the changes before you exit).
2
At the prompt, select Yes to exit, then press any key to reboot
the computer. Any changes you made in SCSISelect take effect
after the computer boots.
16
DOS
and keys to move the