JVC KS-F54 Service Manual page 4

KS-F545
2.1.4 Removing the heat sink
(See Fig.4)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the two screws B and two screws C attaching the
heat sink on the left side of the main body, and remove the
heat sink.
2.1.5 Removing the rear panel
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly and bottom cover.
(1) Remove the two screws D, two screws E and screw F at-
taching the rear panel on the back side of the main body.
2.1.6 Removing the main board
(See Fig.6)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis, heat sink and
rear panel.
(1) Remove the two screws G attaching the main board on the
top chassis.
(2) Disconnect the connectors CP401 on the main board from
the cassette mechanism assembly.
1-4 (No.49828)
All manuals and user guides at all-guides.com
D
G
C B
Heat sink
Fig.4
F E
E
Fig.5
Main board
Fig.6
C
Rear panel
D
Top chassis
G
CP401