Kanomax Climomaster 6501 Series User Manual page 29

netzerotools.com
<Setting the No. TRIAL>
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
<Setting MEAS. POINT>
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
<Data Storage>
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
<Selecting DUCT ENTRY No.>
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaRECTANGLE
3.WIDTHoooooooooooo-
4.HEIGHTooooooooooo-
5.UNIT(mm/inch)aaamm
6.SAVEaRETURN
<Save the Settings>
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
If you press before saving the settings you will return back to the
Main Menu and any setting changes you made will not be saved.
netzerotools.com
Use to select
"2. SAMPLING(n)"and press
Use to select No. TRIAL (1 to
9999) and press
Use to select
"3. MEAS. POINT" and press
Use to select the number of
MEAS. POINT (1 to 2000) and press
.
Use to select
"4. DATA STORAGE?" and press
Use to select YES or NO and
press
.
Use to select
"5. DUCT ENTRY NO." and press
*If you select an empty ENTRY NO., you
cannot start the Flow Rate measurement.
The duct type settings screen will be
displayed. Here you can input the
dimensions of the duct.
*Refer to "Duct Shape/Size Input" on P.16 for
details.
Use to select
"6. SET TO START" and press
.
.
.
.
.
.
27