Kanomax Climomaster 6501 Series User Manual page 19

netzerotools.com
<To Set Duct Size>
Registering a Rectangular Duct
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaRECTANGLE
3.WIDTHoooooooooo800
4.HEIGHTooooooooo500
5.UNIT(mm/inch)aaamm
6.SAVEaINFO
Registering a Circular Duct
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaCIRCLE
3.DIAMETERaaaaaaa300
4.UNIT(mm/inch)aaamm
6.SAVEaINFO
<To Set Units (mm/inch)>
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaRECTANGLE
3.WaSIZEaaaaaaaaa800
4.HaSIZEaaaaaaaaa500
5.UNIT(mm/inch)aaamm
6.SAVEaINFO
<To Save the Setting>
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaRECTANGLE
3.WaSIZEaaaaaaaaa800
4.HaSIZEaaaaaaaaa500
5.UNIT(mm/inch)aaamm
6.SAVEaINFO
If you press before you save, you will go back to the Main
Menu without completing the Duct Shape/Size Input.
netzerotools.com
to select "3. WIDTH" and
Use
press Use
.
width and press
to select "4. HEIGHT" and
Use
press . Use
height and press
The maximum is 9999mm or 999.9 inch.
Use to select "3. DIAMETER"
and press . Use
the diameter of the duct and press
The maximum is 9999mm or 999.9inch.
Use to select "5. UNIT(mm/inch)"
and press .
*For a circular duct, select
"4. UNIT (mm/inch)".
Use to select mm or inch and
press .
Use to select "6. SAVE INFO" and
press .
This will complete the Duct Shape/Size
Input and you are back in Main Menu.
to enter the
.
to enter the
.
to enter
.
17