Table of Contents
Advertisement
• The voice command was too short – it should be
around one second long and more than one syllable.
• You spoke too late or too soon – speak immediately
after the tone.
• You did not record the voice command when the
handsfree was attached – for voice control with a
handsfree kit, record when the handsfree is attached.
• You used another intonation – use the same intonation
as you did when recording the voice command.
Voicemail
If your subscription includes an answering
service, callers can leave a voicemail
message when you cannot answer a call.
Receiving a voicemail message
Depending on your network operator, you are
informed that someone has left a message by a text
message or by a voicemail indication. Press
read the message.
Calling your voicemail service
You can easily call your voicemail service by
pressing and holding
to
Yes
, if you have saved your
voicemail number in the phone. You get the number
from your service provider.
• To enter the number, scroll to Messages, Options,
Voicemail Number
Call time and cost
During a call, the duration of the call is
shown in the display. If you subscribe to
cost information, the call cost (or the number
of call units) is displayed.
You can check the duration of your last call,
outgoing calls and the total time.
• To check the call time, scroll to Calls, Time & Cost,
Call Timers and select an option. To reset the call
time meter, select Reset Timers.
You can check the cost of your last call and the total
cost of your calls.
• To check the call cost, scroll to Calls, Time & Cost,
Call Costs and select an option. To reset the call cost
meter, select Clear Total Cost.
Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Calling
37
Advertisement
Table of Contents
