Sony Ericsson T616UG Manual page 34

2. Select On. Now you are going to record a voice
command for each number type you use with your
Phonebook contacts, for example, "home" or "mobile".
3. Instructions appear. Press
4. Select a number type,
5. Add voice? will appear. Press
6. Lift the phone to your ear, wait for the tone and say
the command that you want to record. The voice
command is played back to you.
7. If the recording sounds OK, press
voice command. If not, press
8. Repeat steps 4 and 7 for each voice command you
need.
You also need to record voice commands for each
contact name, for example, "John".
To record a voice command for a contact name
1. Scroll to Settings, Voice Control, Voice Dialing, Edit
Names, Add voice.
2. Enter the letter corresponding to the first letter of the
contact you want to find,
3. Select a contact.
4. Follow the instructions in the display.
.
Ok
.
Select
.
Yes
to save the
Yes
and repeat step 4.
No
.
Ok
An icon appears next to a contact name that has a
voice command.
Caller name
You can choose whether you want to hear the recorded
contact name when you receive an incoming call
from that contact.
• To turn the caller name On or Off, scroll to Settings,
Voice Control, Caller Name.
Voice dialing
You can voice dial by saying a pre-recorded word.
To make a call
1. From standby, press and hold a volume key for
one second.
2. Lift the phone to your ear, wait for the tone and say
a name, for example "John". The name is played
back to you.
3. If you have several numbers for that contact, after
a second tone, say the number type, for example,
"home".
The number type is played back to you, and the call
is connected.
Calling 33