Sony Ericsson T616UG Manual page 37

Sound recordings
Instead of using the menus, you can record voice
commands to start or to listen to a recording.
To turn on and record recording commands
1. Scroll to Settings, Voice Control, Record Sound.
2. Select On.
3. Instructions appear. Press
4. Lift the phone to your ear, wait for the tone and say
"Record", then press
5. Lift the phone to your ear, wait for the tone and say
"Play", then press
Yes
To start a recording using a voice command
1. From standby, press and hold a volume key for one
second.
2. Lift the phone to your ear, wait for the tone and say
"Record". The voice command is played back to you
and a tone indicates that the recording has begun.
3. To end the recording, press
To listen to recording using a voice command
1. From standby, press and hold a volume key for one
second.
2. Lift the phone to your ear, wait for the tone and say
"Play". The voice command is played back to you.
36 Calling
.
Ok
.
Yes
.
.
Stop
3. Listen to your recordings. Press
Editing your voice commands
You can keep all your voice commands up to date
by re-recording them or deleting the ones you do not
use. See the following example:
To re-record a voice command
1. Scroll to Settings, Voice Control, Voice Profiles,
Edit Commands.
2. Select a voice command.
3. Select Replace Voice.
To listen to a recorded voice command, select
Play Voice.
4. Lift the phone to your ear, wait for the tone and say
the command.
You can also edit the voice command for a contact
name in Phonebook, Manage Contact, Edit Contact.
Tips when recording and using voice
commands
If your phone cannot detect speech, one of the
following might have happened:
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it as you do
during a call.
to stop.
Stop