ATEN CS1744 User Manual page 33

4. After you have made your device selection(s), click Next to perform the
upgrade.
If you enabled Check Firmware Version, the Utility compares the device's
firmware level with that of the upgrade file. If it finds that the device's
version is higher than the upgrade version, it brings up a dialog box
informing you of this and gives you the option to Continue or Cancel.
If you did not enable Check Firmware Version, the Utility installs the
upgrade files without checking whether they are a higher level or not.
As the upgrade proceeds, status messages appear in the Status Messages
panel. The progress towards completion is shown on the Progress bar.
The firmware [Ver 1.0.] is not newer than the current firmware
[Ver 1.0.090] in device CS1742/CS1744 [MAIN]: 000
Continue the upgrade? [Yes/No]
6. The Firmware Upgrade Utility
25