Advertisement
The Bronco 260P.G2 has easy access to the 3 most critical service and
functional components (and are unique to this Bronco model):
1. Oil check
2. Air filter
3. Battery
Battery and Jump Contacts
The battery is located to the top of the oil tank and
includes a set of quick contacts to charge or jump
start the Bronco. This feature is particularly useful if
the machine has been stored for a long period of
time.
Externally Mounted Air Filter
The air filter, which ensures optimum motor
performance, is relocated just below the battery.
To remove air
filter, loosen
wingnut located
behind filter
housing
Gently remove filter from air filter housing.
Make sure to re-tighten wingnut once new filter
is installed.
External Oil Check and Dipstick Access Port
The dip stick is relocated on the operator's right
side (in seated position) weight set
Check to ensure oil level is at correct
measurement level indicated on dipstick. If oil
level is low, add oil using a funnel through the
access port. Oil should be changed after the
first 1-50 hours of use. Thereafter oil should
be changed every 100 hours of operation.
Advertisement
