Sending New Settings To Acendo Vibe - Harman AMX ACENDO VIBE ACV-2100 Instruction Manual

Sending New Settings to Acendo Vibe

NOTE:
The new settings will replace the existing settings on the connected Acendo Vibe.
1.
In the Side menu, click File > Transfer (FIG. 46):
FIG. 46
File > Transfer
2.
This selection invokes the Transfer options window to specify whether to transfer an Acendo Vibe Configuration File to
or from the connected unit, or to send a firmware update to the Acendo Vibe (FIG. 47):
FIG. 47
Transfer Options window - What would you like to do?
Click Send new settings to Acendo Vibe to transfer a selected Acendo Vibe Configuration (*.json) file. See the

Transfer settings from this file section on page 27 for details.
Click Get current settings from Acendo Vibe to view and/or modify the settings defined in the selected Acendo

Vibe Configuration file in the Acendo Vibe Configuration Tool. See the Viewing/Modifying an Acendo Vibe
Configuration File section on page 27 for details.
Click Send firmware update to Acendo Vibe to view and/or modify the settings defined in the selected Acendo

Vibe Configuration file in the Acendo Vibe Configuration Tool. See the Viewing/Modifying an Acendo Vibe
Configuration File section on page 27 for details.
3.
In the Transfer Options window, select Send new settings to Acendo Vibe (see FIG. 47).
4.
The current settings (as currently configured in the Settings application) are sent to the Acendo Vibe.
The system indicates the progress of this transfer, and indicates when the transfer is complete (FIG. 48):
FIG. 48
Transfer - Transferring settings to Acendo Vibe
NOTE: The system will indicate if there was an error transferring the files. In this case, refer to the
Troubleshooting section on page 39.
5.
Close the Transfer window.
Acendo Vibe Conferencing Soundbars - User Guide
Configuring Acendo Vibe Conferencing Sound Bars
28