LG N225WU Owner's Manual page 6

6
ASSEMBLING AND PREPARING
Button
MENU
SMART+
AUTO
INPUT
EXIT
(Power Button)
Activates the main menu.
OSD Lock/Unlock Locks/unlocks the OSD screen.
Functions y To lock the OSD screen, press and hold the MENU button
y To unlock the OSD screen, press and hold the MENU
Use this button to enter AUTO BRIGHT(Only N195WU model), ORIGINAL RATIO
menus.
To adjust the monitor settings, press the AUTO button on the MONITOR SETUP OSD
menu (only supported for analog signal(D-SUB)).
For optimal screen display, use the following resolution.
Optimal Resolution
N195WU 1366 x 768
N225WU 1920 x 1080
Allows selection of the input signal.
y If you connect the monitor to a computer using a D-SUB cable, select either the USB
or D-SUB input signal.
y If only one computer is connected to the monitor, the input signal is detected automati-
cally. The initial input signal is USB.
Exits the OSD menu.
D-SUB input
y Use this button to switch the monitor on or off.
USB input
y On : Press the power button to turn on the power.
y Monitor Off : If you press the power button, the monitor will automatically turn off after
5 seconds.
y USB Off : Press the power button twice to turn off the USB power.
Power Indicator
N195WU When the monitor is in operating mode, the power indicator
will turn purple (on mode).
When the monitor is in power saving mode, the power indica-
tor will blink purple.
N225WU When the monitor is in operating mode, the power indicator
will turn blue (on mode).
When the monitor is in power saving mode, the power indica-
tor will blink blue.
Description
for several seconds. The "OSD LOCKED" message will be
displayed and the screen will be locked.
button again for several seconds. The "OSD UNLOCKED"
message will be displayed and the screen will be unlocked.