Table of Contents
Advertisement
Display
1
Press any button on the front of the monitor to
display the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options
in the OSD menu.
3
Set the options by pressing the buttons on the
front of the monitor.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu
items, use the up arrow (
Each option is explained below.
Analog
Menu
(D-SUB)
HORIZONTAL
o
VERTICAL
o
CLOCK
o
PHASE
o
) button.
USB
x
Moves the display area left or right.
x
Moves the display area up or down.
If vertical lines are shown on the screen, adjust the frequency to mini-
x
mize the lines and adjust the screen's horizontal width.
Adjusts the focus of the screen's image.
Use when frequencies are shown on the screen or when the text ap-
x
pears overlapped. For optimal results, use this option after adjusting
the "CLOCK" option.
Analog: D-SUB (analog signal) input.
y
CUSTOMIZING SETTINGS
MENU DISPLAY
HORIZONTAL
VERTICAL
CLOCK
PHASE
Description
USB: Internal signal through the USB.
19
EXIT
Advertisement
Table of Contents
