Menu Settings; Picture - LG N225WU Owner's Manual

MENU Settings

Picture

1
Press any button on the front of the monitor to
display the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options
in the OSD menu.
3
Set the options by pressing the buttons on the
front of the monitor.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu
items, use the up arrow (
Each option is explained below.
Analog
Menu
(D-SUB)
BRIGHTNESS o
CONTRAST
o
SHARPNESS
o
NOTE
If the screen is not displayed properly after adjusting the settings, use the "FACTORY RESET" op-
y
tion to revert back to the factory default settings. If necessary, enable the "WHITE BALANCE" option
again. This option is enabled only for analog (D-SUB) signals.
) button.
USB
o Sets the brightness of the screen.
Sets the contrast of the screen.
o
Sets the sharpness of the screen.
o
Analog: D-SUB (analog signal) input.
y
CUSTOMIZING SETTINGS
MENU PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
Description
USB: Internal signal through the USB.
17
EXIT