Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG N1941W-PF
Summary of Contents for LG N1941W-PF
- Page 1 Network Monitor ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. ee the label attached on the product and give the information to your dealer when you ask for service. User’s Guide N1642W N1941W...
- Page 2 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards IMPORTANT This accessories may look different from those shown here. User must use shielded signal interface cables (D-sub 15 pin cable, LAN cable) with ferrite cores to maintain standard compliance for the product.
-
Page 3: Important Precautions
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. - Page 4 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
-
Page 5: On Cleaning
Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. -
Page 6: Connecting The Display
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand Place the monitor with its front facing downward on a soft cloth. Assemble the Stand Body into the product in the correct direction as shown in the picture. -
Page 7: Disassembling The Stand
Connecting the Display Disassembling the stand Put a cushion or soft cloth on a flat surface. Change your lock on the product as it follows and turn it in the arrow direction. If you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it. -
Page 8: Positioning Your Display
Connecting the Display Pushing the PUSH button, take the stand base from stand body. Good Position Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display Adjust the position of the panel in various ways for maximum comfort. -
Page 9: Using The Computer
Connecting the Display Using the Computer NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. Connect D-sub(RGB Analog) Cable (PC) Connect D-sub(RGB Analog) Cable (Mac) Wall-outlet type Press button on the front switch panel to turn the... -
Page 10: Using The Monitor
Connecting the Display Using the Monitor Make sure to turn off the computer and product. Connect the cable as below sketch map form Connect peripheral devices Connect LAN Cable (X550 port) Wall-outlet type (Make sure to connect X550 port,not LAN port of PC) X550 port When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest level and adjust the monitor volume. - Page 11 NOTE LAN Cable -For the LAN cable,it is recommended to use SFTP(recommend : 6m,max : 10m) provided by LG. Image quality and some functionality may be degraded if a different LAN cable is used. -To achieve good image quality,avoid using UTP and STP cables.
- Page 12 Connecting the Display Connecting to a X550 port using a LAN cable. Notice Turning the power off while booting the PC may damage the product. Turning the power off while booting the PC may cause it to operate incorrectly. If the mouse is connected using a USB device and is not detected, disconnect and connect it again.
-
Page 13: Control Panel Functions
Control Panel Functions Front Panel Controls Control MUTE Button MENU Button Function • X-PORT : This menu is available, use this button to switch the sound on or off. <mute off> • D-sub : This menu is not available. THIS MENU IS NOT AVAILABLE Use this button to enter or exit the On Screen Display. - Page 14 Control Panel Functions Control SOURCE VOLUME AUTO/SET Button Power Button Power Indicator Function Use these buttons to select or adjust functions in the On Screen Display. Use this button to make either D-Sub or X-PORT connector active. This feature is used when two input sources are connected to the display.
-
Page 15: On Screen Display (Osd) Control Adjustment
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. - Page 16 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub-menu BRIGHTNESS PICTURE CONTRAST GAMMA COLOR PRESET GREEN BLUE HORIZONTAL POSITION VERTICAL CLOCK TRACKING PHASE SHARPNESS LANGUAGE SETUP POSITION VERTICAL WHITE BALANCE POWER INDICATOR...
-
Page 17: On Screen Display(Osd) Selection And Adjustment
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. - Page 18 On Screen Display(OSD) Selection and Adjustment Main menu PICTURE PICTURE MENU : Exit : Decrease : Increase : Select another sub-menu COLOR COLOR MENU : Exit : Decrease : Increase : Select another sub-menu Sub menu Description BRIGHTNESS To adjust the brightness of the screen. To adjust the contrast of the screen.
- Page 19 On Screen Display(OSD) Selection and Adjustment Main menu POSITION POSITION POSITION MENU : Exit : Decrease : Increase SET : Select another sub-menu TRACKING TRACKING MENU : Exit : Decrease : Increase : Select another sub-menu Sub menu Description To move image left and right. HORIZONTAL To move image up and down.
- Page 20 On Screen Display(OSD) Selection and Adjustment Main menu SETUP SETUP MENU : Exit : Adjust : Adjust : Select another sub-menu If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is a D-sub or X-PORT input signal.
- Page 21 On Screen Display(OSD) Selection and Adjustment Main menu USER MENU : Exit : Decrease : Increase SET : Select another sub-menu The INTERNET and NORMAL features become enabled for X-PORT input. Sub menu Description MOVIE This feature lets you easily select the best desired INTERNET image condition optimized to the environment (ambient illumination, image types etc).
-
Page 22: Troubleshooting
Troubleshooting Check the following before calling for service. No image appears No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE"... -
Page 23: Display Image Is Incorrect
Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. Important Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. - Page 24 Troubleshooting Display image is incorrect The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot.
-
Page 25: Specifications
Specifications 15.6 inches (39.6 cm) Flat Panel Active matrix-TFT LCD, Anti- Display Glare coating Visible diagonal size: 39.6 cm 0.252*0.252 mm pixel pitch Sync Input D-SUB X-PORT 1360 x 768 (60Hz) Video Input D-SUB X-PORT Signal Input Resolution Recommend Plug&Play DDC 2B (Only for D-SUB Input) Power On Mode... - Page 26 Specifications 18.51 inches (47.0 cm) Flat Panel Active matrix-TFT LCD, Display Anti-Glare coating Visible diagonal size: 47.0 cm 0.30*0.30 mm pixel pitch Sync Input D-SUB X-PORT 1360 x 768 (60Hz) Video Input D-SUB X-PORT Signal Input Resolution Recommend Plug&Play DDC 2B (Only for D-SUB Input) Power On Mode Sleep Mode...
- Page 27 Specifications D-SUB Preset Modes (Resolution) Display Modes (Resolution) 720 x 400 640 x 480 800 x 600 1024 x 768 1360 x 768 X-PORT Preset Modes (Resolution) Display Modes (Resolution) 800 x 600(72Hz) 1024 x 768(60Hz) 1280 x 720(60Hz) 1360 x 768(60Hz) 1440 x 900(60Hz) Indicator MODE...
- Page 28 This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.LG recommends that wall mounting be performed by a qualified professional installer. Good Position Warning: You can hurt your finger.
- Page 29 Digitally yours...