[Server Setting]; [Fail Over]; [Status Mailing] - LG 65SM5D Owner's Manual

6

[Server Setting]

[Ez Setting]
Set up to connect your signage to a SuperSign server.
• CMS servers
• Control servers

[Fail Over]

[Ez Setting]
This feature enables automatically switching to other input sources in order of priority if the primary signal is
interrupted. It also enables the automatic playback of the content stored on your device.
• [On/Off]: Turns [Fail Over] on or off.
• [Input Priority]: Set the priority of input sources for fail over.
• [Backup via Storage]: Automatically play the content stored on the device when there is no input signal. Set to [On]
to activate Auto, Manual, and [SuperSign Contents].
- Auto: When the automatic input switches due to taking screenshots of an image or video that is playing at regular
intervals, this feature will play back the file. (OLED model is not supported.)
-> - [Capture time Interval]: The time interval can be set to 30 min, 1 hour, 2 hours and 3 hours.
- Manual: When the automatic input switches due to the image and video file being uploaded, the feature will play
back the file.
-> - [Backup media select]: Using the settings button, you can upload a single file in the internal / external memory.
-> - [Preview]: You can preview the uploaded file.
- [SuperSign Contents]: When the automatic input switches, this feature will play the file(s) distributed in SuperSign
CMS.
• [RESET]: Reset to initial settings.

[Status Mailing]

[Ez Setting]
This feature configures the system so that the status of the device is assessed and then notified to the administrator
by e-mail.
• [On/Off]: Turns [Status Mailing] on or off.
• [Mailing Option], [SCHEDULE]: Sets the email sending interval.
• [User E-mail Address]: Set the user email address of the sender.
• [Sending Server(SMTP)]: Set the address of the SMTP server.
• [ID]: Enter the account ID of the sender.
• [Password]: Enter the password for the sender's account.
• Recipient E-mail Address: Set the email address of the recipient.
• Message Delivery: Immediately assess the status of the device and deliver the information to the specified email
address.
• [RESET]: Reset to initial settings.
[Server Setting]
[Fail Over]
[Status Mailing]