Download Print this page

LG 32SE3B Owner's Manual

Digital signage (monitor signage)
Hide thumbs

Advertisement

Quick Links

OWNER'S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and
retain it for future reference.
32SE3B
32SE3KB
43SE3B
43SE3KB
49SE3B
49SE3KB
55SE3B
55SE3KB
65SE3B
65SE3KB
*MFL69150307*
43SL5B
49SL5B
55SL5B
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
P/NO : MFL69150307 (1912-REV02)
www.lg.com

Advertisement

loading

  Also See for LG 32SE3B

  Summary of Contents for LG 32SE3B

  • Page 1 Please read this manual carefully before operating your set and retain it for future reference. 32SE3B 32SE3KB 43SL5B 43SE3B 43SE3KB 49SL5B 49SE3B 49SE3KB 55SL5B 55SE3B 55SE3KB 65SE3B 65SE3KB P/NO : MFL69150307 (1912-REV02) *MFL69150307* www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.
  • Page 2: Table Of Contents

    Optional Accessories Parts and Buttons Connecting the Stand Connecting the Speakers Using the IR Receiver Portrait Layout Attaching and removing the LG Logo Bracket Installing on a Wall REMOTE CONTROL Displaying the Device Name Connected to an Input Port White Balance Adjust Menu...
  • Page 3: Safety Precautions

    • Keep the product away from direct sunlight. • Do not put heavy objects on the product or sit upon it. ► The product can be damaged. ► ► ► If the product collapses or is dropped, you may be injured. Children must • If you install the product in a place that does not meet the pay particular attention. recommended conditions, this may cause serious damage to the • Do not leave the power or signal cable unattended on the product’s picture quality, life cycle and appearance. Please check pathway. with LG or a qualified installer before installing. This caution ► The passerby can falter, which can cause electrical shock, fire, product ► applies to a place where there is an abundance of fine dust or oil breakdown or injury. mist, chemical substances are used, the temperature is very high • Install the product in a neat and dry place. or low, the humidity is very high, or the product is likely to remain ► ► Dust or moisture can cause electrical shock, fire or product damage. turned on for a long period of time (airport and train station), • I f you can smell smoke or other odors or hear a strange sound failure to do so will invalidate the warranty. unplug the power cord and contact the service center. • Do not install the product in an area with poor ventilation (e.g.on ►...
  • Page 4: Precautions To The Ac Adapter And

    ► terminal on the wall. Additionally, do not touch the power cable ► Otherwise, this may cause a fire or electric shock. • Make sure to completely insert the power cord into the AC adapter. right after plugging into the wall input terminal. ► ► If loosely connected, the poor connection may cause a fire or electric ► You may be electrocuted. ► shock. • The appliance coupler is used as the disconnect device. • Be sure to use power cords and AC adapters provided or approved • Please make sure the device is installed near the wall outlet to by LG Electronics, Inc. which it is connected and that the outlet is easily accessible. ► ► The use of non-approved products may cause a fire or electric shock. • As long as this unit is connected to the AC wall outlet, it is not • When unplugging the power cord, always pull it by the plug. Do disconnected from the AC power source even if the unit is turned not bend the power cord with excessive force. off. ► The power line can be damaged, which may cause electric shock or fire. ► CAUTION • Be careful not to step or place heavy objects (electronic appliances, • Be sure to keep the outlet, AC adapter, and pins of the power plug clothing, etc.) on the power cord or AC adapter. Be careful not to...
  • Page 5: Precautions In Moving The Product

    Precautions in moving the product CAUTION WARNING • Do not put or store inflammable substances near the product. ► • Make sure to turn off the product. There is a danger of explosion or fire due to careless handling of the ► inflammable substances. ► ► You may be electrocuted or the product can be damaged. • W hen cleaning the product, unplug the power cord and scrub • Make sure to remove all cables before moving the product. gently with a soft cloth to prevent scratching. Do not clean with a ► ► You may be electrocuted or the product can be damaged. wet cloth or spray water or other liquids directly onto the product. • Make sure the panel faces forward and hold it with both hands to An electric shock may occur. (Do not use chemicals such as move. If you drop the product, the damaged product can cause benzene, paint thinners or alcohol) electric shock or fire. Contact an authorized the service center for • Take a rest from time to time to protect your vision. repair. • Keep the product clean at all times. • Make sure the product is turned off, unplugged and all cables •...
  • Page 6: Licenses

    LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
  • Page 7: Assembly And Preparation

    Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. • SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website ( http://partner.lge.com ) and download the latest software for your model.
  • Page 8: Optional Accessories

    Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Screws Stand Spacers Diameter 4.0 mm x Pitch 0.7 mm Length Model...
  • Page 9 CD (Owner's Manual)/ Media Player Screws Cards MP500/ MP700 Media Player kit ( It may not be supported depending on the model.) AN-WF500 Wi-Fi Dongle kit NOTE • Optional accessories are available for some models. If necessary, please purchase them separately.
  • Page 10: Parts And Buttons

    Parts and Buttons - The image may be different according to the model. 32/43/49/55SE3B 32/43/49/55SE3KB 43/49/55SL5B SPEAKER RS-232C RS-232C EXT IR AUDIO AUDIO Buttons Connection (Only for Panel **SE3B/**SL5B model) Buttons Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Adjust the up and down.
  • Page 11 65SE3B 65SE3KB IR&LIGHT SENSOR SPEAKER RS-232C RS-232C EXT IR AUDIO AUDIO Buttons (Only for **SE3B Connection model) Panel Buttons Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Adjust the up and down. Moves left and right.
  • Page 12: Connecting The Stand

    Connecting the Stand 43/49/55/65SE3* 43/49/55SL5B - For certain models only. - The image may be different according to the Place a soft cloth on the table and place the model. product with the screen facing downward. 32SE3* Place a soft cloth on the table and place the product with the screen facing downward.
  • Page 13: Connecting The Speakers

    - The image may be different according to the Connect an input signal cable before installing model. the speakers. 32SE3B Connect an input signal cable before installing the speakers. Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection.
  • Page 14: Using The Ir Receiver

    Using the IR Receiver NOTE • Please turn off the power before removing the - The image may be different according to the cable. Connecting or removing the speaker model. cable while turned on may result in no sound. This allows a remote control sensor to be placed in a custom location.
  • Page 15: Portrait Layout

    Portrait Layout Using Kensington Lock (This is not available for all models.) When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing The Kensington security system connector is the screen). located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit http://www.kensington.com .
  • Page 16: Attaching And Removing The Lg Logo Bracket

    Using a screwdriver, remove the screw that secures a screwdriver, remove the screw that secures the LG Logo Bracket to the bottom rear of the the LG Logo Bracket to the bottom rear of the monitor.
  • Page 17: Installing On A Wall

    For more information, please refer to the guide A non-VESA standard screw may damage provided with the wall mount. the product and cause the monitor to fall. LG • The warranty will not cover any damages Electronics is not liable for any accidents related caused by using the product in an excessively to the use of non-standard screws.
  • Page 18 Securing the monitor to a wall (optional) WARNING Procedure may differ depending on the model. • If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries, particularly to children, can be avoided by taking simple precautions such as: »...
  • Page 19: Remote Control

    REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover.
  • Page 20 Selects the Picture Mode. INFO Views the information of the currently program and the screen. W.BAL Enters the White Balance menu. SETTINGS Accesses the main menus or saves your input and exit menus. S.MENU SuperSign menu key (Depending upon the model, this feature may not be supported.) Navigation Buttons Scrolls through menus or options.
  • Page 21: Displaying The Device Name Connected To An Input Port

    Displaying the Device Name White Balance Adjust Menu Connected to an Input Port Press the W.BAL button on the remote control. Display which devices are connected to which R-Gain : Adjusts the level of red. The higher ► external input ports. the number, the redder the set.
  • Page 22: Making Connections

    MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC The illustrations may differ from the actual accessories.
  • Page 23 AUDIO OUT RGB OUT 65SE3* RS-232C RS-232C EXT IR SPEAKER AUDIO AUDIO (not included) (not included) HDMI OUT HDMI OUT AUDIO OUT DVI OUT DVI OUT AUDIO OUT RGB OUT (not included) (not included) RS-232C RS-232C EXT IR SPEAKER AUDIO AUDIO (Only for **SE3B model) AUDIO OUT...
  • Page 24: External Device Connection

    External Device Connection Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode. The illustrations may differ from the actual accessories. Some of the cables are not provided. For the best picture and sound quality, connecting external devices to your monitor using HDMI cables is recommended. 32/43/49/55SE3* 43/49/55SL5B (not included)
  • Page 25 65SE3* (not included) (not included) (not included) HDMI OUT Network HD Receiver/DVD/VCR Camcorder/Camera/Gaming Device Direct Connection/ Using the Router/ Using the Internet RS-232C RS-232C EXT IR SPEAKER AUDIO AUDIO (Only for **SE3B model) (not included) AV Receiver...
  • Page 26 NOTE • The monitor set with the HDMI connection for the best image quality. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15-pin cable and DVI-D/HDMI cable. •...
  • Page 27 TROUBLESHOOTING No image is displayed Problem Action Is the product power cord connected? Check if the power cord is correctly plugged into the power ► outlet Does the Out of range message The signal from the PC (video card) is out of the vertical or ►...
  • Page 28 After-image appears on the product. Problem Action After-image appears when the If you use a fixed image for a long time, the pixels may be ► product is turned off. damaged. Use the screen-saver function. When a dark image is displayed on the screen after an image ►...
  • Page 29 PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD Panel Screen Type LCD (Liquid Crystal Display) Panel. Video Signal Max.
  • Page 30 32SE3B LCD Panel Pixel Pitch 0.36375 mm (H) x 0.36375 mm (V) Power Rated Voltage AC 100-240 V~ 50/60 Hz 1.4 A Power On Mode : 50 W (Typ.) Consumption Sleep Mode (RGB, DVI-D) : ≤ 0.5 W Sleep Mode (HDMI) : ≤ 0.5 W Off Mode : ≤...
  • Page 31 43SE3B LCD Panel Pixel Pitch 0.4902 mm (H) x 0.4902 mm (V) Power Rated Voltage AC 100-240 V~ 50/60 Hz 0.9 A Power On Mode : 60 W (Typ.) Consumption Sleep Mode (RGB, DVI-D) : ≤ 0.5 W Sleep Mode (HDMI) : ≤ 0.5 W Off Mode : ≤...
  • Page 32 49SE3B LCD Panel Pixel Pitch 0.55926 mm (H) x 0.55926 mm (V) Power Rated Voltage AC 100-240 V~ 50/60 Hz 1.0 A Power On Mode : 65 W (Typ.) Consumption Sleep Mode (RGB, DVI-D) : ≤ 0.5 W Sleep Mode (HDMI) : ≤ 0.5 W Off Mode : ≤...
  • Page 33 55SE3B LCD Panel Pixel Pitch 0.630 mm (H) x 0.630 mm (V) Power Rated Voltage AC 100-240 V~ 50/60 Hz 1.1 A Power On Mode : 70 W (Typ.) Consumption Sleep Mode (RGB, DVI-D) : ≤ 0.5 W Sleep Mode (HDMI) : ≤ 0.5 W Off Mode : ≤...
  • Page 34 65SE3B LCD Panel Pixel Pitch 0.744 mm (H) x 0.744 mm (V) Power Rated Voltage AC 100-240 V~ 50/60 Hz 1.4 A Power On Mode : 95 W (Typ.) Consumption Sleep Mode (RGB, DVI-D) : ≤ 0.5 W Sleep Mode (HDMI) : ≤ 0.5 W Off Mode : ≤...
  • Page 35 Product Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see Mounting on a wall section for screw sizes. The product specifications below may be changed without prior notice due to upgrade of product functions. (Unit: mm) 32SE3* 55.5...
  • Page 36 43SE3* 43SL5B (Unit: mm) 38.6 38.6 969.6 27.7 27.7 11.9 72.9 72.9 54.0 43SE3KB 43SE3B/43SL5B 384.8 384.8...
  • Page 37 49SE3* 49SL5B (Unit: mm) 38.6 38.6 1102.2 27.7 27.7 11.9 92.1 92.1 54.0 49SE3B/49SL5B 49SE3KB 401.1 401.1...
  • Page 38 55SE3* 55SL5B (Unit: mm) 38.6 38.6 1238 27.7 27.7 11.9 92.1 92.1 54.0 55SE3B/55SL5B 55SE3KB...
  • Page 39 65SE3* (Unit: mm) 41.1 41.1 1456.9 30.2 30.2 11.9 116.1 116.1 56.5 65SE3B 65SE3KB 578.4 578.4...
  • Page 40 HDMI / DVI-D (DTV) supported mode RGB (PC) supported mode Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(kHz) Frequency(Hz) Frequency(kHz) Frequency(Hz) 480/60p 31.5 720 x 400 31.468 70.8 576/50p 31.25 640 x 480 31.469 59.94 720/50p 37.5 800 x 600 37.879 60.317 720/60p 1024 x 768...
  • Page 41 TO SEE THE WEB MANUALS (SOFTWARE USER GUIDE / INSTALLATION MANUAL) You can find more information about the LG Digital Signage (Monitor Signage) in the web manuals (Software User Guide / Installation Manual). For more information, visit the LG website at http://partner.lge.com.
  • Page 44 Changing the factory default copyright notices are available for download. configuration and settings or enabling certain optional features LG Electronics will also provide open source and functionalities may increase code to you on CD-ROM for a charge covering energy consumption beyond the the cost of performing such distribution (such limits required for ENERGY STAR®...