Multi Screen] Mode & Input X C; Aspect Ratio] (Multi Screen) X D; Screen Off Always] S N, 0D; Screen Video Freeze - LG 65SM5D Owner's Manual

74
68. [Multi Screen] Mode & Input (Command: x c)
Saves and controls Multi Screen modes and inputs.
Transmission
(x)(c)( )([Set ID])( )(Data1)( )(Data2)( )(Data3( )(Data4)
( )(Data5)( )(Cr)
Data1 (Sets MultiScreen mode)
10: PIP
22: PBP2
23: PBP3
24: PBP4
Data2 (Sets the MultiScreen Main Input)
Data3 (sets the MultiScreen Sub1 Input)
Data4 (sets the MultiScreen Sub2 Input)
Data5 (sets the MultiScreen Sub3 Input)
80: DVI-D
90: HDMI1
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
96: HDMI3/DVI-D
97: HDMI3/HDMI2/DVI-D
98: OPS
C0: DISPLAYPORT
Acknowledgment
(c)( )([Set ID])( )(OK/NG)( )(Data1)(Data2)(Data3)
(Data4)(Data5)(x)
* This feature may not be supported on some models.
* Only the input modes supported by the model works.
* This feature operates as the last input, and supports data in
DTV format.
* Please add the following statement: "When the Read
operation is performed, 00 is returned if it is not an external
input. "
69. [Aspect Ratio] (Multi Screen) (Command: x d)
Saves and controls aspect ratios (Multi Screen).
Transmission
(x)(d)( )([Set ID])( )(Data1)( )(Data2)(Cr)
Data1 Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data2 00: [Full]
01: [Original]
Acknowledgment
(d)( )([Set ID])( )(OK/NG)(Data1)(Data2)(x)
* This feature may not be supported on some models.
70. [Screen Off] (Multi Screen) (Command: x e)
Turns on/off each screen in the Multi Screen.
Transmission
(x)(e)( )([Set ID])( )(Data1)( )(Data2)(Cr)
Data1 Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data2 00: Screen off
01: Turns the screen off.
* This feature only works when the Multi Screen app is running.
* This feature does not work when there is no signal.
Acknowledgment
(e)( )([Set ID])( )(OK/NG)(Data1)(Data2)(x)
* This feature may not be supported on some models.
71. [Screen Off Always] (Command: s n, 0d)
If you activate the Screen Off Always feature, the monitor
enters Screen Off mode regardless of whether or not you have
activated PM mode.
Transmission
(s)(n)( )([Set ID])( )(0)(d)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(0)(d)(Data)(x)
* This feature may not be supported on some models.
72. Screen Video Freeze (Command: k x)
Controls pauses of the video.
Transmission
(k)(x)( )([Set ID])( )(Data)(Cr)
Data 00: Turns on the freeze function.
01: Turns off the Freeze feature.
* This feature only works in single input mode.
Acknowledgment
(x)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.