Related Manuals for Unfinished Furniture of Wilmington HUTCH W/3 DOORS 54X12X36
Summary of Contents for Unfinished Furniture of Wilmington HUTCH W/3 DOORS 54X12X36
- Page 1 ASSEMBLY INSTRUCTIONS Description : HUTCH W/3 DOORS 54X12X36 Item No. : H-3 ITEM NO.: H-3 Printed in Vietnam REVISED AUG 19, 2016 - 1 -...
-
Page 2: Before Assembly
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. -
Page 3: Part List
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Crown Top back center panel Front frame Top back side with doors panel Bottom back Base frame... -
Page 4: Hardware List
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch Description Sketch Short pan head Long bolt screw (M6 x 45mm) (M5 x 20mm) Medium bolt L-Bracket... - Page 5 STEP 1 Attach light (N) to crown (A) with short screws (7) as shown below. Tighten with a screwdriver STEP 2 Attach glass sections (M) to back of front frame with doors (B) and lock it, as shown below. Attach knobs (14) to doors with long pan head screws (8) as shown below. Tighten with a screwdriver. ITEM NO.: H-3 Printed in Vietnam REVISED AUG 19, 2016...
- Page 6 STEP 3 Attach vertical rails (K) to bottom shelf (G) with bolts (1) as shown below. Tighten with Allen key (15). Then slide top back center panel (H) into the grooves. Attach back rail (D) to vertical rails (K) with bolts (1) as shown below. Tighten with Allen key (15). Slide back side panels (I) into the grooves as shown below.
- Page 7 STEP 5 Attach front frame with doors (B) to the unit with short pan head screws (9) as shown below. Tighten with a screwdriver. STEP 6 Attach L-brackets (10) with short screws (7) as shown below. Tighten with a screwdriver. ITEM NO.: H-3 Printed in Vietnam REVISED AUG 19, 2016...
- Page 8 STEP 7 Slide bottom back panel (J) into the grooves as shown below. STEP 8 Attach base frame (C) to side panels (E) with screws (6) as shown below. Tighten with a screwdriver. ITEM NO.: H-3 Printed in Vietnam REVISED AUG 19, 2016 - 8 -...
- Page 9 STEP 9 Insert brackets (11) into the unit. Place the frame (F) on the brackets and attach with screws (7) as shown below. Tighten with a screwdriver. Place glass shelves (L) on the frame (F) as shown below. STEP 10 Attach crown (A) to the unit with screws (6) as shown below.
- Page 10 STEP 11 Attach connector (N) to the unit with long screws (5) as shown below. Tighten with a screwdriver. Attach metal plates (12) to the unit with short screws (7) and attach metal plates (12) to buffet or server (to secure the product and prevent tipping). Tighten with a screwdriver. Attach steel bands (13) to the unit with short screws (7) and attach steel bands (13) to the wall with medium screws (6) as shown below (to secure the product and prevent tipping).