Setting The Timer Program (Prog. Timer) - Kenwood HM-V655MP Instruction Manual

Setting the timer program
In each of PROG 1 and PROG 2, the timer data including the operating period and played contents can be
program and set to be activated or deactivated.
A non-finalized CD-R or CD-RW cannot be played back.
Adjust the clock before setting the timer
Connect the related equipment under reference to "System connection"
1
Make preparations for the play (recording).
To listen to CD
Insert a disc. (CD-DA only)
(Program playback is not possi-
ble.)
To listen to radio
The station should be preset
¢
prior.
÷ Two timer settings can be reserved independently in two programs PROG 1 and PROG 2.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG 1 and PROG 2 do
not overlap.
2
Set the timer setting program number.
1
Select "TIMER
\
\
(Press the set/demo key while the "?" mark is
blinking.)
2
Select "PROG 1 ?" or "PROG 2 ?".
3
Set it.
(PROG. TIMER)
t
To listen to tape
Insert a tape.
Playing the auxiliary input source
Make timer setting of the compo-
nent connected to the AUX input
jacks.
?".
\
\
6 8
~
Make preparations for record-
ing.
Each press switches the display contents.
"TAPE RVS"
"AUTO PRESET
(Only when the TUNER input is selected)
"INPUT
(Only when the AUX input is selected)
"TIMER
"TIME ADJUST
"APS
Each press switches the display contents.
1 "PROG 1 ?"
2 "PROG 2 ?"
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
÷ When a timer setting has already been made in the se-
lected timer, the setting will be overwritten by the new
setting.
Timer operation
For recording
§ •
~
?"
?"
?"
?"
?"
Continued on next page
47 EN