Table of Contents
Advertisement
1
Turn the system ON (OFF).
Press [K].
•
Pressing the play/pause [E] button of the
desired audio input source also turns the system
ON (page 15, "One touch operation function").
•
Pressing [K] while the system is ON switches it OFF
(standby mode).
2
Select the audio source.
Press the play/pause button of the desired audio
source.
Press [TUNER]/[CDE]/USBE]/
[D.AUDIOE]/[DIGITAL IN]/[AUX].
Press [CDE]/[USBE] or [INPUT
SELECTOR].
Press [INPUT SELECTOR] on main unit to switch
the input source in order of [FM] R [AM] R
[D.AUDIO] R [AUX] R [DIGITAL IN].
With the CD/USB inputs, loading a disc or a USB
device in this unit selects the corresponding input
source automatically.
3
Set the source to be played.
How to load a disc
Hold the disc with the label side up and insert
it into the centre of the disc slot. "LOADING" is
displayed and the input source is switched to CD
. When the disc is loaded, "
playback starts automatically.
■
■
4
■
" lights and
17
To eject the disc...
Press CD EJECT[L]. "EJECT" is displayed and the
disc is ejected.
How to connect a USB device
Hold the device in the correct orientation and
insert the connector all the way. "READING" is
displayed and the input source is switched to USB
. "
" lights and playback of the USB device
starts automatically.
To remove the USB device...
After stopping, set the system to the standby
mode and pull out the USB device.
Start playback.
Play the connected input source.
To stop playback of CD/USB/D.AUDIO...
Press [F]/[STOPF] during playback.
English
Advertisement
Table of Contents
