Table of Contents
Advertisement
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*9
Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*10 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*12 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*13 KX-TGC210 series: page 3
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit's date and time setting
is correct (page 14).
1
M
N#720
2
Select an alarm by pressing 1 to 3. a
MOKN
3
MbN: Select the desired alarm option. a
MOKN
"Off"
Turns alarm off. Go to step 9.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 5.
"Weekly"
Alarm sounds weekly at the set time(s).
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
TGC21x_22xE_OI_(en-en)_ver211.pdf 25
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M N. a MOKN
5
Set the desired time. a MOKN
6
Enter a text memo (10 characters max.).
a MOKN
7
MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN: Select the desired snooze setting.
a MOKN
9
MOKN a M
N
Note:
R Press M
N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Programming
N to stop the
25
3/7/2016 10:42:19 AM
Hide quick links:
Advertisement
Table of Contents
