Set Up Instructions; What's In The Box; Ambient Light Sensor - peerless-AV CL-49PLC68-OB User Manual

Important:
1. The display is equipped with protective glass; however, it is best practice to never apply pressure
to the screen display area which may compromise the integrity of the display. The manufacturer's
warranty does not cover user abuse or improper installations.
2. All cables and cable covers MUST be connected and attached prior to installation on mount.
3. When routing cables through the cable entry make sure that the cables are formed in such a way
as to remove any stress on the connectors.
4. Installation shall be in accordance with the applicable parts of Chapter 8 of ANSI/NFPA70.

What's In The Box

Display
Remote (410-0049)
Rear Cover Plate (CST-1005)
(8) M4 x 10mm screws (SCR-0042)
User Guide
Remote Control Guide
Ambient Light Switch
This display is equipped with an ambient light switch which allows the display to have two brightness
modes to adjust to the environment the display is located in. The switch is located on the back of the
display.
1. Ambient light sensor on: Your display's brightness will automatically dim as ambient lighting
decreases.
2. Ambient light sensor off (depicted below): Your display settings will remain at full brightness even
if the ambient lighting of the room or environment changes.
Hint: Set the ambient light switch to your desired setting before installing the display's rear cover
plate to avoid having to remove the display's rear cover plate to access the switch.

SET UP INSTRUCTIONS

7
Power Cord (CAB-0075)
8mm Socket Bit (PUR-0026)
5.5mm Socket Bit (PUR-0025)
Cord Stress Relief Retaining Bracket (MET-0016)
(2) M3 x 8mm phillips screws (SCR-0007)
2017-02-07 #:180-9097-2 (2017-04-17)