Toshiba PA3575U-1PRP dynadock U User Manual page 6

dynadock™
Handling the AC adaptor and power cables/cords or plugs
When handling the power cable/cord, follow these precautions:
Never tamper with the power cable/cord or plug.
n
Never splice or alter a power cable/cord.
n
Never bend or twist a power cable/cord.
n
Never pull on a power cable/cord to remove a plug from a socket.
n
Always grasp the plug directly.
Never place heavy objects on a power cable/cord.
n
Never run a power cable/cord through a pinch point such as a door or
n
window.
Never place a power cable/cord near a heat source.
n
Never use nails, staples or similar objects to fasten or attach cord in
n
place.
Never attempt to disassemble or repair an AC adaptor.
n
Doing any of the above may damage the cables, and/or result in a fire or
electric shock, possibly resulting in serious injury.
Attaching the power cable/cord
Always confirm that the power plug (and extension cable plug if used)
n
has been fully inserted into the socket, to ensure a secure electrical
connection. Failure to do so may result in a fire or electric shock,
possibly resulting in serious injury.
Be careful if you use a multiple connector. An overload on one socket
n
could cause a fire or electric shock, possibly resulting in serious injury.
Dust on the power plug connectors or connector base
If dust gets on the power plug connectors or connector base, turn the
n
power off and disconnect the power plug. Then clean the connector
and/or connector base with a dry cloth. Continuing to use the product
without cleaning the power plug may result in a fire or an electric shock,
possibly resulting in serious injury.
Only use TOSHIBA AC adaptor
Always use the TOSHIBA AC adaptor that was provided with your
n
product (that may have been provided with your product), or use AC
adaptors specified by TOSHIBA to avoid any risk of fire or other
damage to the product. Use of an incompatible AC adaptor could cause
fire or damage to the product possibly resulting in serious injury.
TOSHIBA assumes no liability for any damage caused by use of an
incompatible adaptor or charger.
EN-6 User's Manual