Table of Contents
Advertisement
MAINTENANCE AND CLEANING
Maintenance
The following pages provide instructions for maintenance, cleaning, calibration, and
troubleshooting for your scale. Maintenance operations other than those described in
this manual should be performed by qualified service personnel.
Caution: Before first use, or after long periods of non-use, check the scale for
proper operation and function. If the scale does not operate correctly, refer to
qualified service personnel.
1. Check the overall appearance of the scale for obvious damage, wear, and tear.
2. Inspect the AC adapter cord for cracking, fraying, and for broken/bent prongs.
Cleaning and Disinfecting
Proper care and cleaning is essential to ensure a long life of accurate and effective
weighing.
Caution: Disconnect the scale from the AC adapter power source prior to
cleaning the unit.
®
1. Health o meter
soft cloth or disposable wipe:
● mild soap and water solution
● 70% isopropyl alcohol
● solution with 1-5% hydrogen peroxide concentration
After cleaning/disinfecting, wipe with a cloth dampened with water and then with a
clean dry cloth. To avoid residue build-up or damp surfaces, ensure the screen and
scale parts are completely dry after cleaning.
2. Never use rough or abrasive materials to clean the scale, as these will damage the
scale's finish.
3. Do not submerge the scale in water or any other liquid.
4. Do not pour or spray fluids directly on the scale.
Professional recommends using one of the following solutions on a
21
Advertisement
Table of Contents
