LG Flatron M4201C-SA Owner's Manual page 10

Connecting to External Devices
1
Turn on power by pressing the power button on the product.
Turn on the PC.
2
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
Or, press the INPUT button at the front side of the product.
INPUT
A
When connecting with a D-Sub signal input cable.
• Select RGB : 15-pin D-Sub analog signal.
B
When connecting with a
• Select HDMI/DVI :
•
How to connect to two computers.
Note
Connect the signal cables (
Press the INPUT button in a remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
SET
AUTO/SET
HDMI to DVI
signal input cable.
HDMI to DVI
Digital signal.
HDMI to DVI
A10
Power button
Input
and D-Sub) to each computer.
Input