Download
 Share
 Print this page
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Monitor
  5. M4210D-B21
  6. User manual

LG M4210D-B21 User Manual

Owner's manual
Hide thumbs

Advertisement

Quick Links

Download this manual
Table of Contents
User's Guide
M4210D
M
ake sure to read the Safety Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
S
ee the label attached on the product and give the information to your dealer when you ask
for service.
Important
WARRANTY VOID
Warranty void if removed.
IF REMOVED
3850TAZ209Y

Advertisement

loading

  Related Manuals for LG M4210D-B21

  Summary of Contents for LG M4210D-B21

  • Page 1 User’s Guide M4210D ake sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. ee the label attached on the product and give the information to your dealer when you ask for service.
  • Page 2 To enjoy clearer and more vivid stereoscopic images See if the resolution is set to Full HD. The recommended resolution for 3D images is 1920X1080. If a viewer moves left or right with a distance of more than 4 m, the screen might look dimmed. Keep a distance of more than 4 m from the product.

  • Page 3: Using The Remote Control

    Using the Remote Control Name of the Remote Control Buttons • Power On/Off Button There is not a function • Input Select Button which is supported (See next page) There is not a function • ARC button which is supported To select the image size of the screen.

  • Page 4: Inserting Batteries Into Remote Control

    Using the Remote Control • Input Select Button If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. INPUT CTR. Inserting batteries into remote control. 1. Take out the battery cap. 2.

  • Page 5: Name And Function Of The Parts

    Name and Function of the Parts * The product image in the user’s guide could be different from the actual image. Rear View REMOTE RS-232C DVI IN RGB IN AUDIO RGB OUT H/PHONE SERLAL CONTROL IN (CONTROL& (RGB/DVI) PORT SERVICE) SP/DIF RGB OUT RS-232C...

  • Page 6: Connecting To External Devices

    Connecting to External Devices When Connecting to your Built in PC When connecting with the DVI signal input cable. Rear side of the product. REMOTE RS-232C DVI IN RGB IN AUDIO RGB OUT H/PHONE SERLAL (CONTROL& PORT CONTROL IN (RGB/DVI) SERVICE) SP/DIF RGB OUT...
  • Page 7 Connecting to External Devices When connecting with the D-Sub signal input cable. Install the Video driver file contained at the supplied CD. Rear side of the product. REMOTE RS-232C DVI IN RGB IN AUDIO RGB OUT H/PHONE SERLAL CONTROL IN (CONTROL&...
  • Page 8 Connecting to External Devices Move the mouse pointer to an empty area on the Windows screen (with no icons or task bars) and click the right mouse button. When the pop-up menu appears, click the 'Properties' menu. Select 'Settings' tab. Click 'Advanced' button.
  • Page 9 Connecting to External Devices Select 'CATALYST(R)Control Center' tab. Click 'ATI CATALYST(R)Control Center' button. Select 'Display Manager'menu. Select 'Detect Displays'button.
  • Page 10 Connecting to External Devices Select gray monitor icon and then press the right button of the mouse. Select 'Clone Main with monitor' menu. Click 'Yes' button. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT Or, press the SOURCE button at the back side of the product.

  • Page 11: When Connecting To Your Pc

    Connecting to External Devices When Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the D-Sub signal input cable. When connecting with the DVI signal input cable. RGB IN Rear side of the product.
  • Page 12 Connecting to External Devices Turn on power by pressing the power button on the product. SOURCE AUTO/SET ON/OFF Power button Turn on the PC. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT Or, press the SOURCE button at the back side of the product.

  • Page 13: Watching Rgb Outputs

    Connecting to External Devices Watching RGB Outputs Use this function when displaying ANALOG RGB inputs of a PC to the other product. To use different products connected to each other • Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products.

  • Page 14: Selecting And Adjusting The Screen

    Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit SOURCE AUTO/SET ON/OFF SOURCE AUTO/SET ON/OFF • Press this button to turn on the power. Press this button again to Power Button turn it off. • This Indicator lights up blue when the display operates normally(on Power Indicator mode).
  • Page 15 Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit AUTO/SET Button If the resolution is 1920X1080 (RGB Mode) Auto in progress If the resolution is not 1920X1080 (RGB Mode) Auto in progress For optimal display Change resolution to 1920 X 1080 * See if the resolution is set to Full.

  • Page 16: Function Description

    Selecting and Adjusting the Screen OSD Menu Icon Function Description Adjusts screen brightness, contrast and color that you prefer. PICTURE Adjusts the audio function. SOUND Adjust the time function TIMER Adjusts the screen status according to the circumstances. SPECIAL Adjusts the screen video. SCREEN Note OSD(On Screen Display)

  • Page 17: How To Adjust The Osd (On Screen Display) Screen

    Selecting and Adjusting the Screen How to adjust the OSD (On Screen Display) screen Save Move where Exit from the Pops up Move where Select a Select a Adjust the status adjustment the menu you want to you want to menu screen.

  • Page 18: Adjusting Screen Color

    Selecting and Adjusting the Screen Adjusting Screen Color • 6500K/9300K Selecting a factory setting color set. 6500K: Slightly reddish white. 9300K: Slightly bluish white. • User : Select this option to use the user-defined settings. Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen.

  • Page 19: Adjusting The Audio Function

    Selecting and Adjusting the Screen Adjusting the audio function The best sound tone quality will be SOUND selected automatically depending on the Flat video type that you're currently watching. Music Balance Movie Sports User • Flat : The most commanding and natural audio. •...

  • Page 20: Time Id To Adjust The Time Function

    Selecting and Adjusting the Screen TIME ID to adjust the time function TIMER Clock MNT Off timer MNT On timer PC Off timer PC On timer Clock This function is used to set up of current time. 1) Press the MENU button and then use button to select the TIMER menu.

  • Page 21: Selecting The Options

    Selecting and Adjusting the Screen Selecting the options Reset Input If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. Reset Child lock Use the buttons to select On or Off. The Set can be set up so that it can only be used with the remote control.
  • Page 22 Selecting and Adjusting the Screen Selecting the options To use this function • - You can connect the product with several other products and use the Tile mode function. Tile mode It is used to enlarge the screen and also used with Tile mode several products to view screen, H-Size...
  • Page 23 Selecting and Adjusting the Screen Selecting the options • Tile mode - Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4) - 4 x 4 available. - Configuration of an integration screen is also available as well as configuration of one by one Display. - Tile mode (product 1 ~ 4) : r(2) x c(2) ID 1 ID 2...
  • Page 24 Selecting and Adjusting the Screen Selecting the options - Tile mode (product 1 ~ 2) : r(2) x c(1) ID 1 ID 2 column Reset Use this function to reset the product to the factory default. However, language selection and PC Control selection will not be initialized. Set ID You can assign a unique Set ID NO (name assignment) to each product when several...

  • Page 25: Adjusting Screen Clock/Phase And Position

    Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position Auto-configure To select the image size of the screen. (1:1 menu are not supported over 1920 X 1080 resolution) Auto-configure Auto-configure This button is for the automatic adjustment of the screen position, clock and phase. This function is suitable for analoge singnal input only.

  • Page 26: Troubleshooting

    Troubleshooting No image is displayed G Is the product power cord connected? • See if the power cord is properly connected to the outlet. G Is the power indicator light on? • See if the power switch is turned on. G Power is on, power indicator is green •...

  • Page 27: The Screen Image Looks Abnormal

    Troubleshooting The screen image looks abnormal. G Is the screen position wrong at the • Press the “AUTO” button in the remote control to RGB mode? automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu.

  • Page 28: After-Image Appears On The Product

    Troubleshooting 'Child lock on' message appears. G The 'Child lock on' message Push the MENU button on the remote control and set Child lock to the 'Off' position. appears when pressing the Menu button. After-image appears on the product. G After-image appears when the •...

  • Page 29: Specifications

    Specifications The product specifications can change without prior notice for product improvement. LCD Panel 42 inches visible diagonal (106.72 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel 0.681 mm (Pixel Pitch) Power Rated Voltage AC 100-240V~ 50/60Hz 2.7A Power Consumption On Mode : 270W Typ.(with PC), 240W Typ.(only Monitor) : ≤...
  • Page 30 Specifications The product specifications can change without prior notice for product improvement. Video Signal Max. Resolution RGB : 1920 X 1080 @60Hz DVI : 1920 X 1080 @60Hz Recommended Resolution RGB : WUXGA 1920 X 1080 @60Hz DVI : WUXGA 1920 X 1080 @60Hz Horizontal Frequency RGB : 30 - 83 kHz DVI : 30 - 83 kHz...

  • Page 31: Pc Mode - Preset Mode

    Specifications PC Mode – Preset Mode Vertical Horizontal Frequency Frequency Preset mode (Hz) (kHz) 31.468 640 x 350 31.469 720 x 400 31.469 640 x 480 37.879 800 x 600 48.363 1024 x 768 44.772 1280 x 720 63.981 1280 x 1024 65.290 1680 x 1050 66.587...
  • Page 32 Specifications VESA wall mounting Connected to another object (stand type and wall-mounted type.) This product accepts a VESA- compliant mounting interface pad.- (This has to be purchased separately if required.) For further information, refer to the VESA Wall Mounting Instruction Guide. Kensington Security Slot- (This has to be purchased separately if required.) Connected to a locking cable that can be purchased...

  • Page 33: Signal Connector Pin Assignment

    Specifications Signal Connector Pin Assignment DVI-D Connector Signal(DVI-D) Signal(DVI-D) T. M. D. S. Data2- Hot Plug Detect T. M. D. S. Data2+ T. M. D. S. Data0- T. M. D. S. Data2/4 Shield T. M. D. S. Data0+ T. M. D. S. Data4- T.

  • Page 34: Connecting The Usb Cable

    Specifications Connecting the USB(Universal Serial Bus) Cable "USB (Universal Serial Bus)" is an innovation in connecting your different desktop peripherals conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your display instead of having to connect them to your computer.

  • Page 35: Controlling The Multiple Product

    Controlling the Multiple Product RS-232C Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. Connecting the cable Connect the RS-232C cable as shown in the picture. * The RS-232C protocol is used for communication between the PC and product.

  • Page 36: Command Reference List

    Controlling the Multiple Product RS-232C Command Reference List COMMAND1 COMMAND2 DATA(Hexa) 01. Power 00H - 01H 02. Main Input Select 01H,07H, 09H 03. Aspect Ratio 08H, 09H 04. Screen Mute 00H - 01H 05. Volume Mute 00H - 01H 06. Volume Control 00H - 64H 07.
  • Page 37 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1]: First command. (k) * [Command 2]: Second command. (a ~ u) * [Set ID]: You can adjust the set ID to choose desired product ID number in Special menu.
  • Page 38 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 01. Power On(Command : a) To control Power On/Off of the Set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off 1 : Power On ff: Read Status Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show the status of Power On/Off.
  • Page 39 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 03. Aspect Ratio(Command : c) (Main picure format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu.
  • Page 40 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 05. Volume Mute(Command : e) To control On/Off of the Volume Mute. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) Acknowledgement [e][ ][Set ID][ ][OK][Data][x] Data 0 : Volume Mute On (Volume Off)
  • Page 41 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 07. Contrast(Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H Refer to ‘Real data mapping’...
  • Page 42 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 09. OSD Select(Command : l) To control OSD on/off to the set. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 0 : OSD Off 1 : OSD On Acknowledgement [l][ ][Set ID][ ][OK][Data][x] Data 0 : OSD Off 1 : OSD On 10.
  • Page 43 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 12. Select Color Temp (Command : u) To adjust the screen color temperature. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0 : User 1 : 9300K 2 : 6500K Acknowledgement [u][ ][Set ID][ ][OK][Data][x] Data 0 : User 1 : 9300K 2 : 6500K...
  • Page 44 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 14. Red Gain Adjust (Command: j w) To adjust Red color level. Transmission [j][w][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H Acknowledgement [w][ ][Set ID][ ][OK][Data][x] * When it is executed with the 6500K or 9300K selected, it is automatically changed to the USER. 15.
  • Page 45 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 17. Tiling Mode (Command :d d) Change a Tiling Mode. Transmission [d][d][][Set ID][][Data][x] Data Description Tiling mode is off. 1 x 2 mode(column x row) 1 x 3 mode 1 x 4 mode 4 x 4 mode * The data can not be set to 0X or X0 except 00.
  • Page 46 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 19. Tile V Position(Command : d f) To set the Vertical position. Transmission [d][f][][Set ID][][Data][x] * The data range is from 00 to 64(in Hex). Acknowledgement [f][][Set ID][][OK/NG][Data][x] 20. Tile H Size(Command : d g) To set the Horizontal size.
  • Page 47 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 22. Tile ID Set (Command : d i) To assign the Tile ID for Tiling function. Transmission [d][i][][Set ID][][Data][x] * The data range is from 00 to 10 tile mode. (in Hex). Acknowledgement [i][][Set ID][][OK/NG][Data][x] 23.
  • Page 48 Controlling the Multiple Product RS-232C Transmission / Receiving Protocol 25. PC Power On/Off (Command : d s) To turn On and Off the built in PC. Transmission [d][s][][Set ID][][Data][x] Data 0 : PC Power Off 1 : PC Power On Acknowledgement [s][][Set ID][][OK/NG][Data][x] *This operates only when ‘PC Control’...
  • Page 49 IR Codes RS-232C How to connect Connect your wired remote control to Remote Control port on the Product. Remote Control IR Code Output waveform single pulse, modulated with 37.917KHz signal at 455KHz Carrier frequency FCAR = 1/Tc = fosc/12 Duty ratio = T1/Tc = 1/3 Configuration of frame •...
  • Page 50 IR Codes RS-232C Code(Hexa) Function Note R/C Button R/C Button VOL( ) R/C Button VOL( ) R/C Button POWER ON/OFF R/C Button (Power On/Off) POWER ON Discrete IR Code(Only Power On) POWER OFF Discrete IR Code(Only Power On) MUTE R/C Button INPUT R/C Button MENU...
  • Page 51 P/NO : 3840TRL098E (0801-REV00)

This manual is also suitable for:

M4210d