Virtual Server - D-Link DIR-825 User Manual

Section 3 - Configuration
Click Virtual Server on the navigation menu to configure the virtual server. The virtual
server performs port-redirection, which allows remote users to access multiple services
on your local network via your public IP address. For example, you may want to connect
two FTP servers on two different machines on your local network to the Internet. Using
Port Forwarding only allows a single machine use port 21, but with port forwarding you
can remap two different external ports to each machine. When you are satisfied with your
configuration, click Save Settings.
24 - VIRTUAL SERVERS LIST
Enable: Check the box to enable this rule.
Name: Enter a name for the application you wish to apply the virtual server
to. Use the Application Name dropdown menu and the << button to
quickly select commonly used applications. The name, private port,
public port, and protocol type are automatically populated.
Public Port:
Enter or adjust the WAN port number in order to remap traffic.
Protocol: Select TCP or UDP from the Protocol drop-down menu.
Schedule: Select the schedule from the drop-down menu. The default is Always.
Refer to Schedules on page 113 for more information on creating
new schedules.
IP Address:
Enter the IP address of the computer on your local network that you
want to allow the incoming service to or use the Computer Name
dropdown menu and the << button to quickly insert a device's IP
address.
Private Port: Enter the LAN port number.
Inbound Filter: You may set the traffic filter to Allow All or Block All traffic.
Click the Save Settings button when you are finished.
D-Link DIR-825 User Manual

Virtual Server

DIR-825
VIRTUAL SERVER VIRTUAL SERVER
VIRTUAL SERVER
The Virtual Server option allows you to define a single public port on your router for redirection to an internal LAN IP Address and
Private LAN port if required.This feature is useful for hosting online services such as FTP or Web Servers.
Save Settings Don't Save Settings
24 - VIRTUAL SERVERS LIST
Remaining number of rules that can be created: 24
Port
Name Public Port
Application Name
<< ▼
☐
IP Address Private Port
Computer Name
<< ▼
Save Settings Don't Save Settings
ADVANCED
Traffic Type
Protocol Schedule
TCP ▼ Always ▼
Inbound Filter
6 Allow All ▼
81