Visionix VX90 Instructions For Cleaning And Sterilization

Hide thumbs Also See for VX90:

Instructions for cleaning and sterilization

This instruction guide aims to clean and sterilize your VX90 for common use .

For your comfort it's recommended to clean the device regularly. Please clean the instrument following these

instructions. Cleaning conducted by a process other than the one described in this instruction may cause

deterioration or damage to the equipment.

1- Cleaning and sterilization of chin rest and forehead rest support

Cleaning of the chin rest and headrest should be done before each measurement.

Clean the chin rest and forehead support with Cidalkan wipes incl. alcohol. disinfectant or other alternative.

Optional items

Chin rest paper (REF. 8290-5015-00)

When using the chin rest paper, use a new sheet for each patient.

For prevention of cross-infection, replace with

a new paper for every new patient. Pull and

replace with a new sheet of paper.

Refraction device

VX90

For other instructions, please refer to the USER MANUAL.

Table of Contents

Do you have a question about the VX90 and is the answer not in the manual?

Page 1 Refraction device VX90 This instruction guide aims to clean and sterilize your VX90 for common use . For other instructions, please refer to the USER MANUAL. For your comfort it’s recommended to clean the device regularly. Please clean the instrument following these instructions.
Page 2 2- Cleaning of lensview 5- Cleaning of joy stick Cleaning the lensview should be done between each patient. Proceed to a regular cleaning of the joystick. If possible For this specific area, please use solutions without alcohol, each time you remove your gloves. alcohol could damage the device.