Table of Contents
Advertisement
Problem
Not dispensing
Doors are not closed completely.
ice.
Infrequent use of the dispenser.
The delivery chute is clogged with
frost or ice fragments.
The dispenser display is locked.
Ice bin is empty.
Auger dispenser motor overheated
from continuous operation.
36
Possible Causes
Care and maintenance
Solutions
Ice will not dispense if any of the
refrigerator doors are left open.
Infrequent use of the ice dispenser will
cause the cubes to stick together over
time, which will prevent them from
properly dispensing. Check the ice bin for
ice cubes clumping/sticking together. If
they are, break up the ice cubes to allow
for proper operation.
Eliminate the frost or ice fragments by
removing the ice bin and clearing the chute
with a plastic utensil. Dispensing cubed ice
can also help prevent frost or ice fragment
buildup.
Press and hold the Lock button for three
seconds to unlock the control panel and
dispenser.
It may take up to 24 hours for each
compartment to reach the desired
temperature and for the icemaker to begin
making ice. Make sure that the shutoff
(arm/sensor) is not obstructed and that the
ice maker switch is in the on position.
Once the ice supply in the bin has been
completely exhausted, it my take up to 90
minutes before additional ice is available,
and approximately 24 hours to completely
refill the bin.
Allow 1 hour for the thermal motor
protector to reset before trying again.
Advertisement
Table of Contents
