Removing Trailer From Pallet
Cut and remove the remaining retaining wires as shown
in Figure A. Then lift and remove the trailer from the
shipping crate as shown in Figure B.
Figure A
Cut and Remove
Shipping Wire
Figure B
With the trailer upright on the ground, remove the
cardboard from the trailer as shown in Figure C.
NOTE: Do not remove the engine mount arm zip tie.
Figure C
8
Remove Trailer
Remove Cardboard
Attaching Trailer to Trailer Pan
Flip the trailer over and place on the trailer pan as shown
in Figure A.
Figure A
Attach the trailer to the trailer pan using (2) clevis pins
P#(K0082) and (2) hair pin clip P#(K0086). Refer to
Figure B.
Figure B
Secure Using
(2) Clevis Pins and
(2) Hair Pin Clips
Dump Handle Installation
Remove the existing 3/8" nut from the pivot bolt as
shown in Figure A.
Figure A
Place Trailer On
The Trailer Pan
3/8"-16
Nut
Pivot Bolt