Upper Hose Installation
Before attaching the Upper Hose, place a Hose Clamp
P#(J0060) relatively loose on both ends of the Upper
Hose. Then insert one end of the 6" upper hose onto the
blower outlet as shown in Figure A.
Figure A
Blower Outlet
Attach the other end of the 6" upper hose to the inlet on
the trailer top as shown in Figure B.
Figure B
Secure the upper hose by tightening both hose clamps.
Refer to Figure C.
Figure C
Upper Hose
12
Attaching Trailer To Tractor
Back the tractor up to the trailer tongue. Lift the trailer
tongue and slide onto the tractor hitch as shown in
Figure A.
6" Upper
Hose
Secure the trailer tongue to the hitch with (1) hitch pin
assembly P#(A0312). Refer to Figure B.
Inlet
Secure the hitch pin using (1) hair pin clip P#(K0086).
Refer to Figure C.
Hose Clamp
Figure A
Figure B
Figure C
Lift Trailer Tongue
And Slide Onto Hitch
Hitch Pin
Hair Pin
Clip