Removing Trailer Pan; Wooden Support Removal - Peco 5920 Operator's Manual

Remove all parts from trailer pan as shown in Figure G.
Figure G

Removing Trailer Pan

Remove the (2) shipping screws from the front trailer
pan as shown in Figure A.
Figure A
Remove (2)
Shipping Screws
Cut and remove the (2) retaining wires from the trailer
pan. Refer to Figure B.
Figure B
Lift the trailer pan off of the chassis and set the trailer
pan upside down as shown in Figure D.

Wooden Support Removal

Using a hammer or pry bar, carefully remove the wooden
supports from the shipping crate. The support consists of
(3) pieces. (2) support legs and (1) top support. Refer to
Figure A.
Cut (2)
Retaining Wire
Using a hammer or pry bar, carefully loosen the top
support and remaining support leg. Refer to Figure B.
Figure D
Set Trailer Pan
In Preparation
Figure A
Loosen
Support Leg
Figure B
Upside Down
Loosen
Support Top
7